Smarter motor. Less power.
An efficient EC motor uses just 10 W on low speed and 16 W on high. Evolve-125 combines dependable extraction with low electrical demand.
Blauberg Evolve-125 125mm Low Energy Inline Extractor Fan – Standard
En stock
Plus que 104 en stock
SKU
EVOLVE-125
User Guides & Data Sheets
97,66 € 81,38 €
Evolve-125 – Low Energy Inline Extractor Fan
125 mm / 5 inch · Standard
- Low energy. Efficient EC motor: 10 W on low speed and 16 W on high speed.
- High airflow. Up to 275 m³/h (76 l/s) maximum free-air airflow through 125 mm connections.
- Standard control. External switched operation with no built-in timer.
- Two speeds. Low and high speed are both included, selected through installation wiring and suitable external switching.
- 5 year warranty. Low energy extraction, backed by the Evolve warranty.
Airflow figures are maximum free-air ratings; installed airflow depends on the duct system.
Evolve-125
125 mm / 5 inch · Standard
Low energy.High airflow.
High performance inline extractor fan.
Big on extraction.
Small on power demand.
Evolve-125 brings low energy extraction to 125 mm / 5 inch rigid duct systems, with two speeds and straightforward external switched control.
Airflow with purpose.
Mixed-flow extraction delivers up to 275 m³/h (76 l/s maximum free-air rating) through 125 mm connections. Select the appropriate speed for your room and duct run.
Efficiency on both speeds.
Low speed delivers up to 228 m³/h at a rated 10 W. High speed raises maximum airflow to 275 m³/h at 16 W. Both speeds are included; selection is through installation wiring and suitable external switching.
High airflow.
Low energy.
Evolve-125 delivers up to 275 m³/h through 125 mm duct connections, with rated power of just 16 W on high speed. Select low speed for up to 228 m³/h at 10 W.
275m³/h maximum free-air airflow*
16 Wrated high-speed power*
Rated power
Maximum airflow
*Manufacturer’s published ratings for the 125 mm motor. Maximum airflow is a free-air rating; installed airflow depends on the duct system. Power varies with the operating point.
Out of the room.
Easy to get to.
Installed within a 125 mm duct run, Evolve-125 keeps the motor away from the room’s extract grille. Its compact body and mounting plate help it fit into a suitable ceiling void or accessible service space.
- Removable motor section for servicing without dismantling the connected ductwork.
- Impact- and corrosion-resistant ABS casing with IPX4 protection.
- Ball-bearing EC motor with thermal overheating protection.
- Wall or ceiling mounting with access maintained for inspection and cleaning.
Standard control. Two speeds.
Evolve-125 has no built-in timer. Operate it through a suitable external switch or control. Low or high speed is selected through installation wiring and suitable external switching, following the supplied instructions.
125 mm. Two speeds.
Clear performance.
Published motor performance for Evolve-125. Select the operating point using the required airflow and resistance of your installation.
Evolve-125
| Performance | Low speed | High speed |
|---|---|---|
| Power input | 10 W | 16 W |
| Max. airflow | 228 m³/h | 275 m³/h |
| Max. airflow, l/s* | 63 l/s | 76 l/s |
| Sound pressure at 3 m | 26 dB(A) | 28 dB(A) |
| Current | 0.11 A | 0.13 A |
| Motor speed | 2,204 rpm | 2,562 rpm |
- Nominal duct size
- 125 mm / 5 inch
- Motor
- Two-speed EC
- Supply, UK application
- 230 V, 50/60 Hz
- Casing
- ABS plastic
- Ingress protection
- IPX4
- Control
- Standard · no built-in timer
- Ambient temperature
- +1 to +40°C
- Transported air
- −25 to +40°C
- Overall L × W × H
- 246 × 167 × 190 mm
*l/s values are rounded as published in the manufacturer’s datasheet. Maximum airflow is a free-air value, not an installed extraction rate. Sound figures are published sound pressure levels at 3 m; room, ductwork and mounting affect the sound heard in use.
View airflow, pressure and power curves
Use the fan curve and your duct system resistance to select the operating point. “Min” and “max” refer to the two included speeds.
View dimensions and fitting information
| Dimension | Evolve-125 |
|---|---|
| Spigot ØD | 123 mm |
| Width B | 167 mm |
| Height H | 190 mm |
| Length L | 246 mm |
| Published base weight | 1.79 kg |
Use nominal 125 mm / 5 inch rigid ducting. Allow access around the fan for installation, wiring and removal of the motor section. Weight is the published base-size figure.
A few useful answers.
Straightforward answers about Evolve-125, the 125 mm Standard inline extractor fan.
What makes Evolve-125 a low energy extractor fan?
Its EC motor uses electronic control to drive the fan efficiently, with published power inputs of 10 W on low speed and 16 W on high speed.
What duct size does Evolve-125 use?
Use nominal 125 mm / 5 inch rigid ducting. The fan’s published spigot diameter is 123 mm. Match the duct system and fittings to this model and check the required airflow at the installed resistance.
Does Evolve-125 have a timer?
No. Evolve-125 is the Standard control version with no built-in timer. Use a suitable external switch or control, following the supplied wiring instructions.
Does Evolve-125 have two speeds?
Yes. Low and high speed are both included. Your installer selects the appropriate wiring and external switching for the application. This model does not include a built-in speed selector, and generic dimmer-style speed controllers must not be used.
Can Evolve be used for bathroom and shower extraction?
Yes, Evolve is designed for ducted extraction from bathrooms, shower rooms and other humid premises. Locate the fan in a suitable accessible position, within its permitted ambient temperature range, and have the electrical and ventilation installation designed and commissioned correctly. IPX4 is not, by itself, approval for every bathroom location.
Will it clear condensation?
Correctly sized extraction helps remove moisture-laden air at its source. Duct design, run time, replacement air and the building’s conditions all affect the result. With Standard control, the extraction run time is managed by the external switch or control; there is no built-in run-on timer.
Can the fan be serviced without removing the ductwork?
Yes. The removable central motor and impeller section is designed for servicing without dismantling the connected air ducts. Keep access available and isolate the electrical supply before maintenance.
Evolve-125 by Blauberg
Low energy. High airflow.
Two speeds. Efficient extraction.
Explore the published airflow, power and sound ratings for this model.
| EAN Number | 5056194057813 |
|---|---|
| Impeller Type | Mixed Flow |
| Motor Type | EC |
| Electrical Supply | 1 Phase 220/250 50/60Hz |
| Size | 125mm |
| Maximum Airflow Rate (l/s) | 76 |
| Maximum Airflow Rate (m3/h) | 275 |
| Control Options | Standard |
| Duct Connection Size | 100mm Dia |
| Power (Watts) | 16w |